Filter a text stream using wildcards and simple SFK expressions with the free Swiss File Knife for Windows, Mac OS X and Linux.
sfk ... +xex /from/ [/from2/]
a stream text filter using SFK Simple Expressions.
- takes text stream input from a previous command
or a single file.
- joins all lines into one large block that can be
searched in complete.
- splits output again into lines for further use,
or passes output as binary to +xed
xed/xex is designed to post process small to medium sized
data streams or files. it is not suitable to edit large files
beyond 100 MB, as the whole content must fit into memory
multiple times. use "sfk xreplace" to process large files.
wildcards and SFK expressions
SFK Expressions are simple patterns containing literal text,
wildcards * and ? and character classes in square brackets .
basically, the syntax provides extended wilcards but no
further logic and is not related to regular expressions.
search patterns are surrounded by a separator character which
can be anything not contained in the search text, like / or _
within a pattern /fromtext/totext/the fromtextmay contain:* - 0 to 4000 characters in the same
text line or paragraph, i.e. all
bytes not being CR, LF or NULL.
4000 is just a default maximum
that can be changed by:
[0.100000 chars] - 0 to 100000 characters in the same
text line or paragraph, i.e. the
same as * but with a larger range.
? - one character.
????? - same as [5.5 chars] or [5 chars][bytes] - 0 to 4000 bytes (with CR,LF,NULL)
i.e. it collects stream text
across lines, even in binary data
** - the same as [bytes].
[0.100 bytes] - 0 to 100 bytes
[.100000 bytes] - up to 100000 bytes
[1.* bytes] - 1 to default maximum bytes
[2 chars] - exactly 2 chars
[30 bytes] - exactly 30 bytes
[byte of aeiou] - one vocal (a OR A OR e OR ...),
case insensitive by default.
"aeiou" is a character list.
[byte of \\\x2f] - a backslash \ or forw. slash /
[bytes of \r\n \t] - whitespace incl. line ends
[bytes of (\r\n \t)] - the same, () are optional
[bytes not \r\n\0] - up to 4000 bytes as long as no
CR, LF or NULL byte appears
[chars] - the same as [bytes not \r\n\0],
i.e. collect text in a line
[char not ( \t)] - same as [byte not ( \r\n\0\t)],
everything not blanks and tabs
[char not )( \t] - not brackets, blanks and tabs,
same as not (\(\) \t)[chars of a-z0-9] - means a-zA-Z0-9 as search is
case insensitive by default
[chars of \x61-\x7A] - search a-z but not A-Z, or use
option -case for case search
[eol] - end of line by characters:
CRLF or LF or CR
[white] = chars of (\t ) - 0 or more whitespaces
[xwhite] = bytes of (\t \r\n) - same but across lines
[1 white] = byte of (\t ) - 1 whitespace
[digit] = byte of (0-9) - 1 digit
[digits] = bytes of (0-9) - 0 or more digits
[hexdigit] = byte of (0-9a-f) - 1 hexadecimal digit
[hexdigits] = bytes of (0-9a-f) - 0 or more hex digits
special keywords that do not count as tokens:
[keep] - search also the following text but keep it
in the input data, without consuming it
[ortext] - foo[ortext]bar searches word foo or bar.
[ortext] is allowed only between literals.
anchors that have no length of their own:
[start] - start of file
[end] - end of file
[lstart] - line start, i.e. start or CRLF or CR or LF
[lend] - logical line end, i.e. eol or end of file.
to replace line ends use [eol] instead.
how to search or replace special characters:
- to search or replace text containing the literal characters
* ? \ [ ] then these must be escaped like \* \? \\ \[ \]
- ( ) are escaped only within character lists, like \( \)
- to search or replace the forward slash '/' type \x2f or use
another char around from/to text, e.g. _fromtext_totext_
- parameters with blanks and non trivial characters need double
quotes "", see also "about Shell Command Characters" below.
expansion priorities: (highest first)
if two search parts are side by side, and the same input
character matches both, then these priorities apply:
5: start, end, lstart, lend
4: literal text, eol
3: whitelist classes: byte of, bytes of
2: blacklist classes: chars not, bytes not
1: plain wildcards: ?, *, **, byte, bytes, chars
this means in "/[bytes]foo/" the [bytes] will stop to collect
characters as soon as "foo" is found, as "foo" is a literal.
on same or higher priority the right side stops the left side.
the totextmay contain:[part 1] use first text part of the fromtext.
e.g. the fromtext /*foo[.100 chars]bar*/
contains parts : 1 2 3 4 5[part1] the same (blank is optional).
[parts 1,2,3] use parts 1, 2 and 3.
[parts 1-10] use parts 1 to 10.
[strip(part1,\0)] use part 1 but remove zero bytes.
only zero bytes "\0" can be removed.
[file.name] full input filename with path
[file.relname] input filename without path
[file.path] input file's path
[file.base] relname without last .extension
[file.ext] input filename extension
[all] use all parts from fromtext.
[setvar name]...[endvar] set variable "name" with data
between setvar and endvar.
[getvar name] fill in data from variable "name"
although anchors like lstart, lend count as a separate part
they need NOT be specified in the totext. this means that
/[lstart]foo[lend]/bar/ just changes the word "foo".
supported slash patterns\t = TAB
\r = CR
\n = LF
\x00 = one byte with code 00 hexadecimal
\0 = short form for \x00
\q = a double quote "
\\ = the backslash character \ itself
\[ = the bracket open character [
\] = the bracket close character ]
\* = the literal star character *
\? = the literal question mark ?
\- = to use literal "-" in a command
Within multi line -bylist files:
\ = slash+blank is changed to a single blank
Only within "char of" or "byte not" lists:
\( = to use literal character "("
\) = to use literal character ")"
SFK expression options
-showpart(s) print /from/ part numbers, range statistics
and expansion priority points per part.
done automatically if a required /to/ text
is not given with a command.
-showbest if a /from/ pattern finds nothing, use this to
see how many parts would match so far, and with
up to how many bytes per part. anchors like [lstart]
may show a non zero length when matching (CR)LF.
-showlist with -bylist, show the internal joined list if
commands are spread across multiple lines.
-showall show all of the above.
-xmaxlen=n set default maximum length for chars or bytes commands,
e.g. -xmaxlen=10000 means /foo*bar/ matches with up to
10000 characters between foo and bar. the default max
length without this option is 4000 characters.
- always use a string literal, or single byte or char, at the start
of your search expressions, like in /foo*bar/ starting with 'f'.Do not use a wildcard like * at the start like in /*foobar/
when searching huge input data, as your search will slow down byfactor 256. Use /[lstart]*foobar/ instead.
- the system may cache output file(s), writing to disk in background
after sfk has finished. subsequent batch commands may execute slower.
-case compare case sensitive, default is nocase.
for further options see: sfk help nocase
-bylist x read /from/to/ patterns from a file x,
supporting multiple lines per pattern.
for details type: sfk rep -full
-bylinelist x read /from/to/ or just /from/ patterns
from a file with one pattern per line.
best for searching many phrases with
simple or no output reformatting.
-i process text stream from standard input
-nomark do not highlight changes in output
-nocol no colors at all to allow more memory
-tofile f write output to file f. do not use +tofile
chaining as it splits data into text lines.
-rawterm on output to terminal do not strip codes
below 32. Null bytes are always stripped.
-dump[raw] create hex dump [raw = w/o eol highlight]
-crlf, -lf for file headers and default totext: force
crlf or lf line endings instead of default
-justrc print no output, just set return code.
-firsthit use only first matching result.
chaining I/O supportextract ... +xed supports binary data transfer.
xed ... +xed supports binary data transfer.
In all other cases like xed ... +filter data is passed
as text lines without zero bytes and up to 4000 chars
per line. Binary transfer needs four times free memory
available then the actual number of bytes passed.
web access support
extracting the head section from a web page can be done like:
sfk xex http://192.168.1.100/ "_<head>**</head>_"sfk xex http://.100/ "_<head>**</head>_"sfk web .100 +xex "_<head>**</head>_"archive file reading
xed may directly read archive file entries like
src.zip\\sub1.bz2\\sub2.tar.gz. for details and
limitations type "sfk help xe".
beware of Shell Command Characters.
to find or replace text patterns containing spaces or special
characters like <>|!&?* you must add quotes "" around parameters
or the shell environment will destroy your command. for example,
pattern /foo bar/other/ must be written like "/foo bar/other/"
within a .bat or .cmd file the percent % must be escaped like %%
even within quotes: sfk echo -spat "percent %% is a percent \x25"unexpected repeat replace behaviour
depending on the input data and search/replace expressions,
it can happen that running the same replace multiple times
on the same stream produces further hits that didn't exist
in the first run. read the sfk xtext extended help text
by "sfk xtext -full" for details.
quoted multi line parameters are supported in scripts
using full trim. type "sfk script" for details.
return codes for batch files
0 = no matches, 1 = matches found, >1 = major error occurred.
see also "sfk help opt" on how to influence error processing.
about example numbers with [brackets]
if you see  type "sfk cmd 1" for whole command in one line.
web referencehttp://stahlworks.com/sfk-xexmore in the SFK Book
the SFK Book contains a 60 page tutorial, including
detailed xed examples with input, script and output.
type "sfk book" for details.
Note: also see "sfk xed" for further examples.
sfk xex in.txt "_foo*bar_[part2]\n_"
extract any text found within the same line between
foo and bar, using "_" as separator character instead
of "/". you may leave out the third "_" to get
an info text listing part numbers.
sfk xex in.txt "_\qfoo\q[.100 bytes]\qbar\q_[all]\n_"
extract any text starting with "foo" enclosed by double
quotes, then having up to 100 bytes (including CR or LF,
i.e. across multiple text lines), then ending with bar
enclosed by double quotes, and print all parts.
sfk xex in.cpp "/printf([bytes]);/[all]\n/"+xed "/);[eol]/[all]/" "/[eol][.100 bytes of \x20]/ /"
collect all (multi line) printf statements from a text
and reformat them as one statement per line. notice
that "/);[eol]/[all]/" is a cover pattern, meaning
it does not change anything, but keeps line endings
after ");" from being changed by other patterns. 
sfk xex in.xml "_<row>[xwhite]<artist>*</[bytes]<album>*</[bytes]<track>*</_[part4]\t[part8]\t[part12]\n_"
if in.xml contains simple xml data like:
then reformat this to tab separated csv data. 
sfk xex in.csv "_[lstart]*\t*\t*_<row>\n <artist>[part2]</artist>\n <album>[part4]</album>\n <track>[part6]</track>\n</row>\n_"
if in.csv contains tab separated data like:
then reformat this to xml data. 
dir | sfk xex -i -bylist dirtags.txt
reformat windows 'dir' command output like:
05.12.2013 19:17 <DIR> myproj
28.01.2010 22:08 197 readme.txt
using a bylist file dirtags.txt like:
/DIR : [part13]\n/.
/??.??.????[white]??:??[white][digit][* not ( )][white]*
DIR : myproj
sfk xex in.hpp "/bool[xwhite]bCl*;/" "/int[xwhite]iCl*;/"
extract variable declarations like "bool bClDone;"
or "int iClCounter;" from source code, including
statements across multiple lines.
sfk xex in.html "_<head>**</head>_"
extract head section from an html. notice that "_" is
used as the separator, as "/" is part of the text.
sfk xex in.txt "/[lstart][4 chars][15 chars][15 chars]*/[part2]\t[part3]\t[part4]\n/"+xed "/[white][char of (\t\r\n)]/[part2]/" +tabtocsv
extract from fixed column data like below: 
7936JAMES FOO ATLANTA 20140129
the first three columns as comma separated data like
sfk xex in.zip\\sub1.tar.bz2\\sub2.tar.gz\\Trace.hpp "/class*/"
XE: extract phrases starting with "class" from a
.tar.gz within a .tar.bz2 within a .zip file.
XD: demo reads first 1000 bytes from sub2.tar.gz
sfk xex in.txt "/rel: [02 digits].[02 digits].[04 digits]/[setvar date][parts 2,3,4,5,6][endvar]/" +getvar
searches a phrase like "rel: 03.09.2016" within in.txt
and stores it as an sfk variable "date". the +getvar
prints all defined variables with their content. 
sfk xex in.xml "_<zone>**<id>*</id>_[part"
type this incomplete command to get part number infos.
then complete the command like:
sfk xex in.xml "_<zone>**<id>*</id>_[part4]\n_" +filt -line=3+setvar zoneid +echo -var ".100/start.php?zone=#(zoneid)"
from an xml file like
get the 3rd id and create an http URL using echo.
add +tweb to execute the web request. 
sfk xex foo.h +setvar a +then xed bar.c"/[lstart]#include \qfoo.h\q*[eol]/[getvar a]/"
replace a text line: #include "foo.h"
within file bar.c by the file content of foo.h
sfk -var setvar a="foo bar" +echo -pure "#(a)"+xex -justrc "_foo_" +if "rc=1" tell "got foo"
check if variable a contains 'foo' by xex.
can be extended to check for multiple, flexible
expression patterns in parallel.
sfk -var setvar a="foo bar"+if "#(contains(a,'foo')) = 1" tell "got foo"
check if variable a contains 'foo' directly.
fast but only one static text pattern.
for details, type: sfk help var
sfk echo aabbccdd +xed "/[2 chars][2 chars][2 chars][2 chars]/[parts 4,3,2,1]/"
produces ddccbbaa, i.e. it swaps 4 blocks of
2 chars each. (little endian conversion)